Optical Light Source Adapters
DLS 360
Handheld Dual Laser Light Source
The DLS 360 dual laser source allows stabilized power levels for accurate loss measurements on single mode systems. Technicians can utilize each of the wavelengths included in this light source to reference and test with RP 4XX series optical power meters and gather measurements to meet international standards.
Part No: DLS 360
Share this product
Downloads
- Document: M-DS030-07 DLS 360 Technical Sheet (EN)
- Document: M-DS030-07 DLS 360 Technical Sheet (ES)
- Document: M-UM009-03 DLS 360 User Guide (EN)
- Document: M-UM009-03 DLS 360 User Guide (ES)
- Document: Full Broadband Catalog
Overview
The DLS 360 dual laser source allows stabilized power levels for accurate loss measurements on single mode systems. Technicians can utilize each of the wavelengths included in this light source to reference and test with RP 4XX series optical power meters and gather measurements to meet international standards.
The DLS 355 provides a 2 kHz tone output which is recognized by the RP 4XX series power meters; the incoming 2 kHz signal is identified and an audible alert is provided by the power meter. This 2kHz signal will also allow fiber identification when used with non-invasive fiber identifier devices, such as the LFI 110.
The dual laser source comes with a female SC adapter to allow connection to test jumpers and fiber under test. Easy removal of the adapter means that the light source ferrule can be cleaned to prevent contamination of test jumpers. Additional adapters are available.
- 1490 nm & 1625 nm Wavelengths
- NIST Traceable Measurements
- 2 kHz Tone Output
- Universal Connector Interface Compatible with SC, FC, ST, & LC
- Long Battery Life
Specifications
| Wavelengths | 1310 nm, 1550 nm |
|---|---|
| Optical Interface | Universal Connector (SC / FC / ST / LC) |
| Tone Identification | 2 kHz Incoming Signal - Audible AlertPower OnPus |
| Power On | Push Button ON / Auto-Off |
| Output Power | -5 dBm |
| Output Stability | ± 0.05 dB (1 Hour), ± 0.03 dB Long-Term (15 min. Warm-Up) |
| Spectral Width | 5 nm / 5 nm |
| Laser Class | Class 1 (FDA 21 CFR 1040.11) |
| Battery Type | CR2 |
| Operating Temperature | -10° to +50° C |
| Storage Temperature | -30° to +60° C |
| Tool Case Included | Yes |
| Dimensions | 6.1″ x 0.94″ x 0.75″ (15.5 x 2.38 x 1.9 cm) |
| Weight | 3.0 oz (85.4 g) |
